Bridge type circular wing gate

With the rapid development of technology, the safety precautions of communities and parks have been continuously upgraded, and the bridge arcSmart Wing GateThe application has also expanded from the original small range to more fields, and the rapid development of market demand has made the maintenance of bridge-type arc smart wing gates more important. Therefore, bridge arc wing gate manufacturers teach you how to maintain gate equipment, and perform regular maintenance according to the requirements. Maintenance needs to be carried out according to the following points:

1. It is forbidden to push or pull the door by hand when the schematic diagram of the wing gate passes.

2. The schematic diagram of the wing gate process can only be put into use after passing the functional test to ensure that the equipment is working properly;

3. When the passer passes the wing gate flow diagram, the gate must first hold the authorized card to the card reader to read the card or manually open the door to open;

4. Schematic diagram of the intelligent wing gate. When the equipment is not in use, it is strictly prohibited to sit and lean on the gate pole, so as not to cause unnecessary damage to the gate;

5. During the reading and writing, before the traffic indicator turns into a green arrow, it is strictly forbidden to squeeze, lean on, and push the brake lever, so as not to affect the normal operation of the equipment. Technology Co., Ltd. provides professionally. product.

The movement of the bridge-type arc smart wing gate can be said to be the heart of the machine, which is related to the operation core of the gate. Generally, it is maintained once a month, open the upper cover and cut off the power, clean the dust, and clean the transmission part before adding butter or high-concentration motor oil. Check whether the fasteners are loose, tighten the fasteners, check the wear of the wearing parts, the positioning arm and the positioning disc have more than 3mm, the above clearance should be replaced in time, normal clearance (1-1.5mm), solenoid valve Properly add butter or engine oil in the core to make the solenoid valve move left and right to reduce resistance and get lubricated. Don't add too much, it should be moderate.

The maintenance of the circuit maintenance of the bridge arc wing gate needs to be paid attention to when the power is off. First of all, according to the previous use, see if there is a problem in the electric control part. If there is no problem, you can check whether the power supply is exposed and bandaged, the wires are sorted, whether the wires are aging, and replaced. Refer to the manual of the bridge arc wing gate to check the parameters of each part. If there is a problem, it is necessary to find the root cause of the problem and replace the individual electronic components.