Bridge type octagonal wing gate

The shape of the bridge octagonal smart wing gate is stamped and formed of stainless steel plate, which is beautiful and generous, rust-proof and durable, and adopts a standard external communication interface to the outside. It can easily integrate barcode readers, ID cards, IC cards and other card readers in the gate The equipment provides a civilized and orderly way for people to enter and exit, while preventing illegal people from entering and exiting; in addition, the system is specially designed to meet the requirements of fire protection, in the event of an emergency, to ensure that the passage is unobstructed and facilitate the evacuation of personnel in time .

Functional characteristics of bridge octagonal wing gate

1) With zero self-check function, it is convenient for users to maintain and use

2) Illegal entry has an alarm prompt function.

3) Anti-shock function, when the opening signal is not received, the swing arm is automatically locked.

4) Infrared/mechanical double anti-pinch function, when resistance is encountered during the reset process of the swing arm, the motor will automatically stop working within a specified time, and the force is very small, and an alarm will be issued at the same time.

5) The intelligent wing gate has an automatic reset function, and the pedestrian swipe card is effective. If the system does not pass within the specified time, the system will automatically cancel the pedestrian's access permission.

6) The standard external communication interface can be connected with a variety of card readers, and can be remotely controlled and managed by the management computer.

Main technical parameters of bridge octagonal wing gate

1) Power supply voltage: AC220±10% V, 50HZ

2) Drive motor: DC motor 24V/40W

3) Working ambient temperature of bridge octagonal wing gate: -15OC-60OC

4) Relative humidity: relative humidity ≤90%, no condensation

5) Input interface: 12V level signal or 12V pulse signal with pulse width>100ms, drive current>10mA

6) Communication interface: RS232

7) Communication distance: ≤10 meters

8) Channel width: single pole length 600-900MM

9) Passing speed: 30 people/minute (normally open mode), 20 people/minute (normally closed mode)

10) Gate opening and closing time: 1-2 seconds

Working principle of intelligent wing gate system

1) Turn on the power, and the system enters the working state after 3 seconds.

2) When the card reader reads a valid card, the buzzer will make a pleasant sound, reminding pedestrians that the card has been successfully read, and at the same time judge and process the information read from the card, and send an application pass signal to the main control board .

3) The main control board receives the signals from the card reader and the infrared sensor, and after comprehensive processing, it sends an effective control signal to the direction indicator and the motor to turn the direction indicator sign into a green arrow pass sign and emits the set voice Prompt, the main control board controls the motor operation, the proximity switch limits the motor operating angle, the gate opens, and pedestrians are allowed to pass.

4) In the process of pedestrians passing through the channel, the infrared sensor is always in the sensing state and continuously sends signals to the main control board until the pedestrian has completely passed the channel.

5) When there is no card or an invalid card is read, the bridge octagonal wing gate system will prohibit pedestrians from passing, and a voice alarm will be issued, so that the pedestrian can only be released after exiting the channel, and the system enters the waiting state.