Channel gate rental

The channel gate rental equipment adopts alloy steel movement and the "tri-lobed damping cam" independently controlled by Zhongkong, and the operating attenuation life can reach 5 million times. The read head of the three-roller gate is packaged in a special box, which is very protective and anti-interference. The LED indicator and the authentication and identification devices such as the read head box and fingerprint device adopt a waterproof design of splicing installation mode, which can prevent 200mm water immersion ( Calculated from the installation base), the system adopts a standard electrical interface to the outside, and the electrical components can reach the equivalent IP54 waterproof level. The working environment temperature supports -28°C to 60°C, that is, it can work in a strong storm and rain outdoor environment.

The working voltage is AC110V~220V, the speed of travel is 40 people/minute, and the noise of the mechanical structure is 32 dB when it runs smoothly. It is fully modularized. The readhead box, the main body and the movement can be separated by DIY. Partial return, convenient operation and maintenance. It adopts its own biometric access control controller, which is perfectly integrated with the access control reading head and integrates biometric technology. It can combine fingerprint identification authentication, face recognition authentication, card swipe authentication, ID card authentication, finger vein and multi-modal palmprint Multiple identification and mixed identification authentication methods such as authentication, channel gate rental customers can customize conversion boards containing different authentication methods according to their needs to improve the security level.

Channel gate rental detection card verification, only the gate with built-in IC card module has IC card verification function, the tester holds the registered card in the card swiping area and swipes the card in the correct way, the device voice prompts "Thank you", the screen prompts "Verification successful ", the gate is verified, the traffic indicator turns green arrow, and the tester pushes the gate to pass the gate. Then the tester swiped the card in the swiping area with an unregistered card. The verification failed. The device prompts "Verification failed" and the screen prompts "Verification failed". If the verification fails, the traffic light turns red X, and the gate cannot pass.