Bridge swing gate

BridgeSmart swing gateIt is more and more widely used in daily life, and it also occupies a very important position in the gate industry. The bridge swing gate is mainly used for the entrance and exit management of public places. Considering that the opening mode of the bridge swing gate is to expand to both sides, And the width can be wider than other gates. Therefore, most bridge-type swing gates can be mixed with pedestrians, bicycles, mopeds, handicapped vehicles, strollers, luggage and other non-motorized vehicles.

Advantages of bridge swing gate:

1. Wide range of application: The bridge-type swing gate channel is wider, which can meet the needs of more places, and is suitable for all non-motor vehicle passage management.

2. Convenient expansion: It adopts ARM control technology, which is more convenient for expansion, can keep up with the development of the times, and can add new expansion functions at any time to meet the needs of use.

3. Anti-collision: When the swing arm of the bridge-type intelligent swing gate encounters an external force to push the impact, it automatically activates intelligent reverse thrust, continues to recoil, does not lock, can withstand the impact force within a safe range, and activates the alarm at the same time, and automatically Reset. While realizing humanized injury prevention, it also greatly reduces the mechanical damage caused by frequent or continuous collisions.

4. The transmission life of the bridge swing gate: The transmission life of the bridge swing gate adopts the brushless motor up to 10 million times, which is three times that of the ordinary gate in the market.

5. Bridge swing gate compatibility: The bridge swing gate is equipped with a dry contact signal output interface and a wide threshold level signal input interface, which is compatible with various access control controllers.

【Technical parameters of bridge swing gate】

◇Chassis material: domestic standard (No. 304) stainless steel

◇Chassis size: 1200 long * 280 wide * 980 high (mm)

◇Length of swing arm: ≤900mm

◇Weight: gross weight 65Kg

◇ Swing arm transmission angle: 180 degrees

◇Swing direction: unidirectional or bidirectional

◇Working voltage: AC220 ±10% V/50 ±10% HZ

◇Drive motor: DC brush motor (24V)

◇Input interface: dry contact signal or 12V level signal or 12V pulse signal with pulse width ≥100ms, drive current ≥10mA

◇Communication interface: TCP/IP communication

◇Travel speed: 40 people/minute (normally open), 25-30 people/minute (normally closed)

◇ Gate opening and closing time: 1-2 seconds

◇Time required to enter the pass state after power on: 3 seconds

◇Automatic reset time after failure: 10 seconds

◇Working environment: indoor and outdoor (shade)

◇Temperature: -15℃—— 60℃ Relative humidity of bridge swing gate: ≤90%, no condensation